704-455-SWIM
 

 

We Sell


Epoxy pool coatings have proven to be the most effective long-range protection for swimming pool surfaces. This is due to the fact that epoxies cure to a very hard, non-porous finish that is insensitive to pool chemicals, ph balance and automatic pool cleaning machines. Their "ceramic-like" qualities create a fresh and inviting appearance that will be easy to clean and extremely durable. We produce two types of epoxy pool coatings. The following product descriptions will enable you to decide which system is right for you.

The Zeron System

High Gloss Finish
Alternative to Plaster
Longest Lasting

The ZERON system is the longest lasting epoxy pool coating available. You can expect up to eight years of service from one application of this product.

The greatest advantage of the ZERON system is that it only requires one coat. ZERON is a heavier bodied material than POXOLON 2 so it will require a little more effort in its application and will not spread as far. However, due to the extremely long life of ZERON, the cost per year of service is lower than any other pool coating available.

This coating may be applied by roller or airless spray equipment. ZERON is highly recommended for professional pool builders and pool service companies as an alternative to traditional pool plaster. The finished surface will stay brighter and will be easier to keep clean than a plastered pool.

Coverage: Approximately 125 - 150 square feet per gallon.
Available in these attractive colors: White, Blue Ice, Bikini Blue and Blue Mist.

The Poxolon 2 System

Tile-Like Finish
Low Maintenance
Years of Life

POXOLON 2 is a high gloss epoxy pool coating that is easy to apply and should yield up to five years of service. This finish is very easy to clean as is the case with all epoxy pool coatings. You may use POXOLON 2 on most conventional pool surfaces with excellent results. Uncoated pool surfaces will require a prime coat to insure good adhesion. Recommended for use by pool service companies and the do it yourself pool owner. Use with primer on concrete, plaster, fiberglass and metal pools. Two finish coats of POXOLON 2 are required in all cases. POXOLON 2 may be applied by either airless sprayer or roller.

Coverage: Approximately 225 - 250 square feet per gallon.
Available in these attractive colors: White, Blue Ice, Blue Mist, Bikini Blue, Viking Blue, Spanish Blue, Sunshine Yellow, Red Pepper, Black, and Clear.

 

 

Rubber-base coatings are one of the most popular types of coatings used for
refinishing swimming pools, due largely to the fact that most swimming pools
were originally coated with chlorinated rubber prior to the development of
epoxy coatings. Today, rubber-base pool coatings still provide an attractive, easy to apply finish.

Paralon 2 - Chlorinated Rubber

Soft Satin Finish
Easy to Apply
Extended Durability

PARALON 2 is our premium grade chlorinated rubber pool enamel. This coating is recommended for refinishing existing chlorinated rubber coatings. It is an attractive, low sheen, rubber-base pool enamel with high water resistance. The soft satin appearance will please the most discriminating pool owner while providing economical protection for the pool surface. Two coats of PARALON 2 are required for best results. On unusually porous, bare surfaces like concrete or plaster, a third coat may be necessary.

Coverage: 250 - 275 square feet average per gallon.
Available in these attractive colors:
White, Blue Ice, Blue Mist, Bikini Blue and Black.

Optilon - Synthetic Rubber

Strong Surface
Excellent Protection
Resists Chemicals

OPTILON is a quality synthetic rubber-base formula meeting all of the high performance expectations of chlorinated rubber. OPTILON can be applied to bare concrete or plaster as well as over old rubber base coatings. OPTILON also has excellent chemical resistance and color retention while yielding 2-3 years average service. Two coats of OPTILON are required for best results. On bare surfaces that are unusually porous, a third coat may be necessary.

Coverage: 250 - 275 square feet average per gallon.
Available in these attractive colors:
White, Blue Ice, Blue Mist, Bikini Blue and Black.
 

Hydrolon
Applies to Damp Surfaces
Cures Quickly
No Solvent Fumes

HYDROLON is a water-base acrylic enamel designed for fast easy application on bare concrete or plaster and over an old rubber base finish. HYDROLON can be applied to damp surfaces and has no solvent vapors. The unique properties of HYDROLON make it perfect for seasonal commercial application or for use in indoor facilities. Two coats are required but a third may be necessary for unusually porous bare surfaces.

Coverage: 250 - 300 square feet average per gallon.
Available in these attractive colors:
White, Blue Ice, Blue Mist, Bikini Blue and Black.

Reminders

  • Thoroughly remove all loose coating before recoating.
  • Always follow the three step cleaning process outlined on the label. This
    removes all contaminants which may impede performance of the coating.
  • Try to avoid application in the direct rays of a hot sun.
  • Do not coat when surface temperature is below 50°F.
     

 

 

704-455-SWIM